ejak insiden yang menimpa Boeing 737 MAX Lion Air dan Ethiopian, pesawat tersebut dilarang terbang di seluruh dunia. Namun, hari ini Boeing akhirnya mendapat kabar positif setelah sekian lama.
Melalui Bloomberg, European Union Aviation Safety Agency (EASA) atau regulator penerbangan Eropa telah menyatakan puas atas perkembangan yang dilakukan oleh Boeing untuk pesawat Boeing 737 MAX.
Meski demikian, bukan berarti Boeing 737 MAX akan segera terbang dalam waktu dekat. EASA melalui Executive Director-nya, Patrick Ky, menyatakan bahwa Boeing 737 MAX dinyatakan aman dan bisa kembali terbang sebelum tahun 2020 berakhir.
Saat ini EASA sedang menyiapkan dokumen final untuk sertifikasi kelayakan terbang yang seharusnya akan rampung bulan depan. Kemudian komentar dari publik akan dikumpulkan selama periode 4 minggu. Barulah setelah itu di bulan Desember 2020, Boeing 737 MAX bisa kembali mengudara di langit Eropa.
Boeing 737 MAX Dituntut Lebih Baik
Meski sudah dinilai layak terbang, namun EASA nampaknya tidak akan puas dengan perkembangan saat ini. Kedepannya, EASA juga mengharapkan perkembangan lanjutan untuk Boeing 737 MAX. Spesifiknya, sistem sensor sintetis ketiga akan dipasang untuk meningkatkan level keamanan dari pesawat tersebut.
Pada insiden terjatuhnya pesawat Lion Air & Ethiopian, sistem sensor angle-of-attack (AOA) pada kedua pilot mengalami malfungsi. Sensor sintetis ketiga tersebut akan menjadi fitur back-up yang membantu pilot untuk melihat apakah pesawat mengarah ke atas atau ke bawah.
Disebutkan bahwa perlu waktu 2 tahun untuk mengembangkan sensor tambahan tersebut, yang mana akan diwajibkan pada varian terbesar Boeing 737 MAX 10 yang akan mulai beroperasi di tahun 2022.
Regulator penerbangan Eropa telah memberikan lampu hijau untuk pesawat Boeing 737 MAX. Kemungkinan besar kita bisa melihat pesawat tersebut mulai terbang di langit Eropa sebelum tahun 2021. Melihat perkembangan positif tersebut, tidak menutup kemungkinan pesawat tersebut akan turut mendapat sertifikasi & kembali terbang juga di benua lain.
Ketika kembali terbang, saya cukup percaya bahwa Boeing 737 MAX akan menjadi salah satu jenis pesawat teraman. Wajar saja mengingat banyaknya uji coba dan regulasi baru yang harus dipenuhi oleh Boeing. Meski masih ada keraguan, saya pribadi tidak masalah untuk terbang di pesawat tersebut.
After being grounded in March 2019 following two fatal crashes, the Boeing 737 MAX is expected to be certified by the Federal Aviation Administration to fly again later this fall. Investigations pointed to a problem with the aircraft’s Maneuvering Characteristics Augmentation System, or MCAS. This automated control system was designed to stabilize the plane and compensate for the more powerful engines used on the 737 MAX compared to previous versions.The FAA’s certification of the plane has come under fire because manufacturers can speed up the process by having only enhancements to a preapproved aircraft reviewed and certified. Ronnie R. Gipson Jr., an expert in aviation law and visiting professor at the University of Memphis Cecil C. Humphreys School of Law, whose work was cited in the House Committee on transportation and infrastructure’s report on this issue, explains what happened and ways to improve these safety regulations.
What are the criticisms of the FAA certification process stemming from the 737 MAX crashes? The process for the certification of a transport category aircraft is a very involved and costly process. The aircraft manufacturers that go down this path have to be committed to spending hundreds of millions of dollars. It starts with an initial design, and the aircraft that is produced is then subjected to dynamic flight testing for compliance with all of the Federal Aviation Administration regulations. Once the airplane satisfies all those requirements, the aircraft is given an original type certificate by the FAA. The aircraft manufacturer is then allowed to produce aircraft and sell them.
As time goes on, technology advances and the manufacturer identifies ways to improve on that original design. So the manufacturer goes back to the FAA and says, “We want to take this initial design that we have and amend it because we made some changes.” At this point, the aircraft manufacturer files what’s called an amended type certificate application for a derivative aircraft from the baseline aircraft. For example, the original type certificate for the first 737 design was submitted to the FAA in 1967. That original design has had multiple derivative aircraft approved by the FAA, with the 737 MAX being the 13th version.In the amended type certification process, the regulatory authority focuses only on what’s changed.
Another thing to keep in mind is that the FAA just doesn’t have the manpower to oversee all the tests that go with an amended type certificate approval. Therefore, the FAA reviews most of the critical changes related to safety and delegates the noncritical changes for review to the manufacturers – in this case to a body in Boeing which consists essentially of Boeing employees.
And that’s what happened here. MCAS wasn’t necessarily presented as a change in the design impacting control in flight. As a result, the MCAS was not a priority for the FAA in the amended certificate approval process. The MCAS capabilities and what it was supposed to control were never fully revealed. That’s really where the problem started. It was with the narrative that was being presented to the FAA, and the lack of oversight in the amended type certificate process. The result was that the MCAS system that was initially presented to the FAA at the beginning of the amended type certificate process was not the same system that ended up in the aircraft (view chart in gallery).
How will the recent recertification for the 737 MAX ensure that the model is now safe? The FAA has had to backtrack and give the MCAS system the intense level of scrutiny that it deserved. The FAA has required the manufacturer to go back and make significant adjustments to the software, in addition to changes to the operator’s manual, which is what the pilots would see.
How can the certification process be improved?
I see two paths to take. First, for a transport category aircraft, regulations are changed so that the manufacturer can receive amended type certificates for only 20 years after the original type certificate has been issued by the FAA.Here’s how that would work: An aircraft manufacturer designs an aircraft for certification in the transport category and applies for the original type certificate in 2020. Once the original type certification is awarded in, say, 2025, then the manufacturer should have 20 years. That means that the manufacturer would have until the year 2045 to seek an amendment to that original type certificate. Beginning in 2046, if the aircraft manufacturer wants to make subsequent design changes, they have to start over and get a new original type certificate.The second component to resolving this problem would be to step in and review what areas the FAA can delegate oversight authority for system changes in an amended aircraft certification application review.
What are the obstacles to making these changes?
One would be money. The FAA has a budget, and these are very costly measures because the FAA will need more engineers and administrators. And for that to happen, Congress has to be prepared to spend the money to make that happen by increasing the FAA’s budget. There’s also going to be a cost to the industry. Implementing the proposal of a 20-year cap on the validity of that original type certificate is going to impose a greater financial cost on the aircraft manufacturers of transport category aircraft. They’re not going to have as much time to get a return on their investment for the aircraft that they produce. So the aircraft are going to end up costing more, which means the airlines are going to end up paying more for those planes. And that cost is going to trickle down to the flying public in those seats.
Federal Aviation Administration (FAA) Chief Steve Dickson conducted a nearly two-hour evaluation flight at the controls of a Boeing 737 MAX on Wednesday (September 30), a milestone for the jet to win approval to resume flying after two fatal crashes. Dickson, a former military and commercial pilot, and other FAA and Boeing pilots landed shortly before 11 a.m. local time (1800 GMT) at King County International Airport – also known as Boeing Field – in the Seattle area. “I like what I saw on the flight,” Dickson told a news conference afterwards, but said he was not ready to give the jet a clean bill of health, with FAA reviews still ongoing.”We are not to the point yet where we have completed the process,” Dickson said. Dickson also told reporters he had completed the revised pilot training protocols and a session in a flight simulator. The flight was a key part of the U.S. planemaker’s long-delayed quest to persuade the FAA to lift a March 2019 grounding order triggered by 737 MAX crashes in Ethiopia and Indonesia that killed 346 people within a five-month period.
The accidents plunged Boeing into its worst-ever crisis, strained its relationship with the FAA, threw into question the U.S. regulator’s position as the standard-bearer for global aviation safety and prompted bipartisan calls in Congress to overhaul how the FAA certifies new airplanes. Dickson said; “The FAA and I in particular, will not approve the plane for return to passenger service until I’m satisfied that we’ve adequately addressed all of the known safety issues that played a role in the tragic loss of 346 lives aboard Lion Air Flight 610 and Ethiopian Airlines Flight 302. Not a day goes by that I and my colleagues don’t think about the victims and their families.”
Federal Aviation Administration (FAA) chief Steve Dickson on Wednesday will fulfill a promise he made just months after taking command of the regulatory agency in the midst of Boeing’s 737 MAX crisis.
“I am not going to sign off on this aircraft until I fly it myself and am satisfied I would put my own family on it without a second thought,” Dickson told FAA employees last November.
On Wednesday he’ll take off from Boeing Field in a high-profile test flight intended as Dickson’s personal assurance to the public that the MAX is safe following 19 months of intense scrutiny by his agency.
It’s the clearest signal yet that the FAA is poised to unground the jet in late October or early November.
The MAX was grounded worldwide in early March 2019 after the second of two fatal accidents that together killed 346 people aboard almost-new aircraft. A series of investigations established that the pilots on the Lion Air and Ethiopian Airlines jets struggled against a flawed flight control system on the MAX that overcame their commands.
Since then, the FAA and international regulators have been minutely examining the fixes proposed by Boeing.
As the company girds against the new existential threat posed by the historic pandemic-driven aviation downturn, Dickson’s flight is a high-stakes moment.
For the MAX crisis that has consumed Boeing, shattering its plans for accelerated production and causing the loss of significant market share to rival Airbus, it could perhaps at last be a turning point.
Dickson tests Boeing’s fixes Dickson’s MAX test plane is scheduled to depart from Boeing Field at about 9 a.m. and is expected to fly for about two hours. Dickson will brief reporters after landing, at a news conference around 11:30 a.m. that will be broadcast live on the FAA’s website and social-media platforms.
On Tuesday in Seattle, Dickson and FAA Deputy Administrator Dan Elwell completed the recommended new pilot training for the MAX as part of the preparation for the flight.
Dickson is a former Air Force F-15 jet fighter pilot, and as a captain with Delta Air Lines he flew the previous models of the 737 as well as other Boeing and Airbus jets. At Delta, he rose to senior vice president of flight operations, responsible for the safety and operational performance of the airline’s global fleet.
He took charge of the FAA in July 2019.
Testifying in December before the U.S. House Transportation Committee, Dickson reiterated the FAA position that “when the 737 MAX is returned to service, it will be because the safety issues have been addressed and pilots have received all the training they need to safely operate the aircraft.”
Last December, Dickson starkly rebuked Boeing’s then-CEO Dennis Muilenburg for seeming to push for clearance to fly the MAX by the end of that month.
In August, the FAA laid out the proposed design changes on the MAX that it believes will make it safe. The proposals drew more than 200 comments from the public and aviation experts.
As the ungrounding approaches, foreign aviation regulators are lining up their own requirements and Congress is beginning to consider legislation to reform the process through which the FAA certifies airliners.
Last week, the executive director of the European Union Aviation Safety Agency (EASA), Patrick Ky, said publicly that his agency expects to sign off on ungrounding the 737 MAX in November.
EASA will stipulate further changes beyond those in the FAA proposal, but Ky said those can be retrofitted after the jet’s return to service and so won’t delay the MAX’s ungrounding.
And on Monday, the House Committee on Transportation announced a bipartisan legislative proposal designed to strengthen the FAA certification process.
However, at this point ahead of the election, it’s unlikely new legislation can be passed before next year.
An FAA report detailing the required pilot training must be published, with a period for public comment.
And a multi-agency Technical Advisory Board must review the final design documentation and issue its report.
The Federal Aviation Administration (FAA) issued a Special Airworthiness Information Bulletin for owners and operators of Boeing’s Dreamliner on Thursday. The bulletin applies to the three Dreamliner models, the 787-8, 787-9, and 787-10. In their bulletin, the FAA flags the possibility of the autopilot flight director system failing to capture the localizer on an ILS approach.
The FAA says there were reports that;
“…the autopilot flight director system was not providing proper guidance to capture the localizer when intercepting the localizer at large angles (40 degrees or more) from the runway and beam centerline.”
FAA bulletin follows problems with Dreamliner ILS approaches at Hong Kong Earlier this year, Simple Flying reported that there had been five incidents at Hong Kong Airport where Boeing 787 aircraft descended below the minimum safe altitude. It was believed the terrain around the airport was causing the false or failed localizer signal captures. At the time, Boeing told Simple Flying;
“Boeing is working closely on this issue with the AAIA and CAD in Hong Kong as well as the FAA. Boeing has provided information to 787 operators, including instructions for pilots to monitor data closely on certain approaches. We are also working on a permanent resolution.”
FAA bulletin provides a forensic breakdown of the ILS problem The bulletin issued by the FAA yesterday provides a forensic breakdown of the problem with Dreamliner ILS. According to the FAA, guidance from the autopilot flight director system partially reduced the intercept angle. However, the aircraft continued through the localizer at a heading not aligned with the runway centerline. The primary flight display continued to display “LOC” as the active roll mode, and there was no indication of a failure to capture.
However, both the localizer pointer and scale on the primary flight display did reveal the error. The affected aircraft initially turned toward the localizer heading, “but then stopped short and flew at a constant heading that intercepted the runway heading at a 20 to 30-degree angle.”
The FAA says localizer and glideslope modes were engaged, and the AFDS provided guidance to descend on the glideslope. This meant the aircraft continued to deviate from the runway centerline and descend on an incorrect heading.
Over 1,000 Dreamliners are in service around the world. The agile plane has proved a big hit with airlines and is now flown by scores of operators. But the Dreamliner has not been without its problems.
There have been continual quality control problems dating back the best part of a decade. These include problems concerning parts of the fuselage not meeting exacting engineering standards. In August, issues with improper fuselage shimming and inner skin surfacing were highlighted at Boeing’s 787 factory in Charleston. There have also been quality-control problems with the Dreamliner’s horizontal stabilizers.
In response to the incidents and the subsequent FAA bulletin, Boeing has issued a new Flight Crew Operations Manual Bulletin. The Boeing bulletin flags the problem and provides information on the operating instructions for AFDS operation during an ILS approach. The FAA also advised yesterday that Boeing is still working on updating the software to fix the problematic localizer mode behavior during Dreamliner ILS approaches.
Here I share Final Committee Report – The Design, Development and Certification of the Boeing B737 Max from MAJORITY STAFF OF THE COMMITTEE ON TRANSPORTATION AND INFRASTRUCTURE (The House Committee on Transportation and Infrastucture), USA Congress
A committee’s Democrats say two fatal crashes were a “horrific culmination” of engineering flaws, mismanagement and oversight lapses.
The two crashes that killed 346 people aboard Boeing’s 737 Max and led to the worldwide grounding of the plane were the “horrific culmination” of engineering flaws, mismanagement and a severe lack of federal oversight, the Democratic majority on the House Transportation and Infrastructure Committee said in a report on Wednesday.
The report, which condemns both Boeing and the Federal Aviation Administration for safety failures, concludes an 18-month investigation based on interviews with two dozen Boeing and agency employees and an estimated 600,000 pages of records. The report argues that Boeing emphasized profits over safety and that the agency granted the company too much sway over its own oversight.
“This is a tragedy that never should have happened,” said Representative Peter A. DeFazio of Oregon, the committee chairman. “It could have been prevented, and we’re going to take steps in our legislation to see that it never happens again.”
Republicans on the committee, without issuing their own report, also called for safety improvements. But Representative Sam Graves of Missouri, the committee’s top Republican, said that while change was needed, congressional action should be based on expert recommendations, “not a partisan investigative report.”
The report was issued as the F.A.A. appeared close to lifting its March 2019 grounding order for the Max after evaluating data from test flights this summer and proposing changes to the jet. F.A.A. clearance could lead aviation authorities elsewhere to follow suit and allow the plane to fly again as soon as this winter.
Even as it strives to get the Max back into service, Boeing is contending with other challenges, including the deep downturn in air travel because of the coronavirus pandemic, and quality concerns about its 787 Dreamliner.
The congressional report on the Max identified five broad problems with the plane’s design, construction and certification. First, the race to compete with the European rival Airbus and its new A320neo led Boeing to make production goals and cost-cutting a higher priority than safety, the Democrats argued. Second, the company made deadly assumptions about software known as MCAS, which was blamed for sending the planes into nose dives. Third, Boeing withheld critical information from the F.A.A. Fourth, the agency’s practice of delegating oversight authority to Boeing employees left it in the dark. And finally, the Democrats accused F.A.A. management of siding with Boeing and dismissing its own experts.
“These issues must be addressed by both Boeing and the F.A.A. in order to correct poor certification practices that have emerged, reassess key assumptions that affect safety and enhance transparency to enable more effective oversight,” the Democrats said in the report.
Those crashes were caused in part by the MCAS system. Because the engines are larger and placed higher than those on the plane’s predecessor, they can cause the jet’s nose to push upward. MCAS was designed to push the nose back down. In both crashes, the software was activated by faulty sensors, sending the planes toward the ground as the pilots struggled to pull them back up.
The deaths could have been avoided if not for a series of safety lapses at Boeing and “grossly insufficient” oversight at the F.A.A., the Democrats argued. Internal communications at Boeing showed that several employees raised concerns about MCAS over the years, but their concerns were either dismissed or inadequately addressed, the House report said. It also accused Boeing of intentionally misleading the F.A.A., echoing a July report from the Transportation Department’s inspector general.
That report found that Boeing had failed to share critical information with regulators about important changes to MCAS and had been slow to share a formal safety risk assessment with the agency. The inspector general also said that Boeing had chosen to portray the MCAS software as a modification to an existing system rather than a new one, in part to ease the certification process, a decision that an authorized F.A.A. representative at the company agreed with, according to the congressional report.
Under federal law, the agency is allowed to delegate some oversight to manufacturers, but that practice backfired at Boeing, the congressional report found.
In 2012, for example, a Boeing test pilot took more than 10 seconds to reverse an MCAS activation, a response time that he later described as “catastrophic.” Boeing cited that finding several times over the years in internal documents, but the House report found no evidence that any of the four F.A.A. representatives at the company who knew of the finding ever passed it on to the agency. Sharing the information was not required, but the failure to do so was “inconceivable and inexcusable,” the report said.
F.A.A. management came in for severe criticism over its response to the crashes. In December, the report said, Ali Bahrami, the F.A.A.’s associate administrator for aviation safety, told committee staff members that he was unaware of an internal assessment produced after the first crash that had predicted 15 more over the lifetime of the Max fleet if MCAS was not fixed.
The report also said the agency was “inexplicably slow” in turning over records.
“The F.A.A. was actually more frustrating” than Boeing, Mr. DeFazio said on a call with reporters. “I’m not sure that we ever got all of the email chains we wanted. They claimed to have a very primitive old computer system.”
The report faulted Boeing for a lack of transparency, driven in part by a desire to play down the need for simulator training for pilots. Under a 2011 contract with Southwest Airlines, for example, Boeing had promised to discount each of the 200 planes in the airline’s order by $1 million if the F.A.A. required such simulator training for pilots moving from an earlier version of the aircraft, the 737NG, to the Max. That, the committee argued, created an incentive for Boeing to withhold critical safety information from the agency.
“This report lays bare the lie that Boeing cares about safety or the hundreds of lives they have ruined,” said Yalena Lopez-Lewis, whose husband, Army Capt. Antoine Lewis, died in the Ethiopian Airlines crash. “Boeing cut corners, lied to regulators, and simply considers this the cost of doing business.”
Democrats declined to provide details of prospective legislation, but said they were working on bipartisan reforms that could be passed before the end of the year.
“We are working closely with Republicans in the hope of coming to an agreement on a reform proposal in the very near future,” Representative Rick Larsen of Washington, the chairman of the aviation subcommittee, told reporters.
In a statement, Boeing said it had learned lessons from the crashes and had started to act on the recommendations of experts and government authorities.
“Boeing cooperated fully and extensively with the committee’s inquiry since it began in early 2019,” the company said. “We have been hard at work strengthening our safety culture and rebuilding trust with our customers, regulators and the flying public.”
The revised Max design has received extensive review, the company said, arguing that once the plane is ready to fly again, “it will be one of the most thoroughly scrutinized aircraft in history.”
The F.A.A. said in a statement that it would work with the committee to carry out any recommended changes and was already making some of its own.
“These initiatives are focused on advancing overall aviation safety by improving our organization, processes and culture,” it said.
Last month, the agency announced plans to require a number of design changes to the Max before it can fly again, including updating MCAS and rerouting some internal wiring. The proposed rule is open for public comment until next week. Barring major obstacles, the agency could lift its grounding order on the plane in the weeks or months to come, allowing Boeing to prepare the planes to fly as soon as this winter.
While hundreds of orders for the jet have been canceled, several thousand remain. In some cases, customers cannot break contracts or are otherwise deeply entwined with Boeing. Many also still want to add the Max to their fleet. A new plane can last a generation and typically requires little maintenance in the first few years of use. The Max promises substantial fuel savings, too, which can add up over several decades.
Still, Boeing warned in January that the grounding would cost more than $18 billion. And that was before the severe downturn in travel caused by the pandemic. Last month, Boeing said it would expand the 10 percent cut to its work force announced in April. And the company said last week that deliveries of its 787 Dreamliner, a large twin-aisle jet used for long-distance flights, had been slowed by new quality concerns.
6 August 2020 The FAA proposes two civil penalties totaling $1.25 million against Boeing for alleged violations in the program that allows the aircraft manufacturer to perform certain functions on behalf of the FAA. The FAA alleges that Boeing managers exerted undue pressure or interfered with the work of FAA designees at the company’s plant in South Carolina. The first civil penalty, for $1,066,655, alleges Boeing implemented an improper structure of its FAA-approved Organization Designation Authorization (ODA) program. The ODA program authorizes Boeing to perform approved functions on behalf of the FAA, including inspecting aircraft and issuing airworthiness certificates. Between November 2017 and July 2019, employees in two ODA units reported to managers who were not in approved ODA management positions. Boeing failed to ensure ODA administrators were in a position to effectively represent the FAA’s interests, the FAA alleges. The FAA further alleges that between September 2018 and May 2019, non-ODA Boeing managers exerted undue pressure or interfered with ODA unit members.The second civil penalty, for $184,522, alleges Boeing on Feb. 26, 2020 failed to follow its quality control processes and subjected ODA members to undue pressure or interfered with an airworthiness inspection of a Boeing 787-9. In both cases, the FAA found that despite the alleged undue pressure or interference from Boeing managers, the ODA unit members fulfilled their FAA responsibilities to ensure aircraft were conforming and in a condition for safe operation prior to issuance of their airworthiness certificates.Boeing has 30 days after receiving the FAA’s enforcement letters to respond to the agency.
NEW YORK, KOMPAS.com – Pabrikan pesawat asal AS Boeng melaporkan kerugian sebesar 2,4 miliar dollar AS atau setara sekira Rp 35 triliun (kurs Rp 14.621 per dollar AS) pada kuartal II 2020. Dikutip dari CNN, Kamis (30/7/2020), kerugian ini mengisyaratkan masalah yang dialami Boeing lantaran terus bergumul dengan permasalahan terkait pesawat seri 737 MAX dan pandemi virus corona (Covid-19). Dalam catatan kepada para pegawai, CEO Boeing Dave Calhoun menyatakan, berlarutnya dampak virus corona akan mewajibkan Boeing melakukan asesmen terkait jumlah tenaga kerja. Baca juga: Dampak Covid-19, British Airways Pensiunkan Seluruh Pesawat Boeing 747 Ini adalah sinyal bahwa Boeing akan melakukan pemutusan hubungan kerja (PHK) lebih dari 10 persen atau 16.000 orang, angka yang sebelumnya diumumkan. Investor sendiri tidak terkejut dengan pengumumkan kinerja keuangan Boeing. Sebab, mereka sudah tahu pada bulan lalu Boeing hanya mengirimkan 10 pesawat. Calhoun pun menuturkan, Boeing berencana melanjutkan pengurangan produksi seluruh pesawat jet komersialnya. Bahkan, ada potensi lini perakitan pesawat Boeing 787 Dreamliner akan ditutup. “Kami juga harus mengevaluasi cara paling efisien untuk memproduksi (pesawat) 787, termasuk mempelajari kemungkinan konsolidasi produksi di satu lokasi,” imbuh Calhoun. Baca juga: Boeing PHK 6.000 Karyawan, CEO: Saya Berharap Ada Cara Lain… Boeing memproduksi pesawat seri 787 Dreamliner di pabriknya di Charleston dan dekat Seattle. Boeing menyatakan hanya akan memproduksi 6 unit pesawat tersebut per bulan pada tahun depan, lebih rendah dari angka saat ini yakni 10 unit. Boeing juga berencana menurunkan produksi pesawat Boeing 777 per bulannya menjadi hanya dua unit dari sebelumnya 5 unit per bulan. Pada awal Juli 2020, Boeing menyatakan hanya sanggup mengirimkan 20 unit pesawat komersial. Ini adalah angka terendah pengiriman pesawat komersial Boeing dalam satu kuartal sejak 1977. Sepanjang Juli 2020, Boeing harus menghadapi pembatalan pesanan 60 unit pesawat. Pada Maret 2020, pesanan pesawat yang dibatalkan mencapai 150 unit, April 2020 mencapai 108 unit, dan 126 unit pada Mei 2020. Konsumen utama Boeing, yakni maskapai penerbangan di seluruh dunia, terpukul akibat pandemi virus corona. Anjloknya permintaan transportasi udara membuat ribuan pesawat diparkir di seluruh dunia dan maskapai pun berdarah-darah.
“Kenyataannya adalah dampak pandemi terhadap sektor penerbangan masih terus parah. Mski ada beberapa tanda perbaikan, kami mengestimasikan butuh waktu tiga tahun untuk kembali ke level jumlah penumpang pada tahun 2019,” ujar Calhoun.
TOKYO, July 28, 2020 – Boeing and Mitsubishi Heavy Industries (MHI) recently signed a Direct Commercial Sale agreement to support upgrades to Japan’s F-15J fleet.
The contract is part of a larger $4.5 billion modernization program, announced by the U.S. Government in October 2019. The upgrades will introduce state-of-the-art electronic warfare and weapons. An all-new advanced cockpit system, running on the world’s most advanced mission computer, will deliver pilots enhanced situational awareness.
Under the agreement, Boeing will provide MHI with retrofit drawings, ground support equipment and technical publications for the upgrade of the first two F-15J aircraft to the Japan Super Interceptor configuration.
Boeing has partnered with MHI in the defense arena since the 1950s. MHI produced under license the current Japan F-15J fleet of over 200 aircraft between 1980 and 2000, and will serve as prime contractor for the upgrade. Sojitz Corporation, a trading company that works with Boeing’s team in Japan, will support this effort.
“Through this agreement, Boeing is honored to further our long-standing tradition of support for Japan’s Ministry of Defense, the Japan Air Self-Defense Force, and MHI,” said Will Shaffer, Boeing Japan President. “These upgrades will deliver critical capability for national and collective self-defense, in which the F-15J plays a key role. At the same time, they will provide MHI and our partners in Japan’s aerospace defense industry with an opportunity to enhance their own extensive engineering capabilities.”
This DCS contract lays the foundation of the modernization program. MHI will develop the detailed modification plan for the jets and prepare the facilities and workforce for the induction and upgrade of up to 98 aircraft beginning in 2022.